Tag Archives: emily

One of the E’s

Quite a few years ago my mom bought me a large letter E with a hook on the end. I don’t know where she got it or for what occasion I was given this E but I have held on to it, never having a place to hang it but knowing that it would be useful one day. Now that I’m living in my condo I need ready access to my dog Nelly’s leash.  Enter the E. My plan was to change the color and then hang this on the wall behind the front door for hanging Nelly’s leash and my keys so both will be easily accessible when she needs to go for a walk. It was a cream color and the paint was purposely aged, not exactly the look I was going for in the condo but nothing that some paint couldn’t improve.

E 003-001

E 001-001

To smooth the surface I used some high grit sandpaper on the paint. I was able to smooth out some of the chips and get rid of some of the excess paint. I took a damp paper towel and wiped off the paint dust so the letter was ready for a new color.

E 005

After allowing the letter to dry, I brought out my new paint, pool blue. Using a 1” sponge brush I painted on a smooth thin first layer of paint.

E 010-001

I allowed that to dry for about 20 minutes and then applied a second coat, making sure to paint in nice smooth strokes so I would have a nice finished product.

The final step was be installation on the wall. Two quick screws and it was ready for her leash and my keys! One project done…too many to go!

photo (1)-001



Going grey – in a good way

Before I moved in any furniture I knew I wanted to paint the living room a new color. When I bought my condo I painted the whole place from top to bottom including ceilings. The previous owner had been a smoker and to get rid of that smell I painted and replaced all of the carpet. Thankfully over the last five years my tenants respected my no smoking rule and things were still pretty fresh.

Condo Before 2013 014

Even though things were still in great shape I didn’t want to keep the tan walls that I had chosen, but I wanted to keep things neutral. What color would I chose? Well the ever popular neutral of choice for many lately…GREY! I bought a gallon and recruited my dad and we got to work.


With dad cutting in and me rolling we got quite a bit done in the first afternoon. I was a little nervous it was looking bluer than I wanted, but I know that paint looks different once it is dried so we kept working.


Well after painting for about four hours we called it a night and went home. I went back the next morning to check on things because the furnace had not been working very well. As soon as I walked in I knew that things were not looking good. Due to the lack of good heat in the condo the paint did not dry evenly and it was definitely looking like two different colors on the wall! I knew before that I would need to do some touch ups, but the way things were looking I was sure that I would have to put on a complete second coat on the entire room. I was not happy, but I couldn’t leave it how it was, so I added painting back onto my to-do list.

I went and bought a second gallon of paint, inadvertently buying a higher quality paint but in the same color. By this time we had the furnace up and running properly. I started using the new paint while dad continued with the remains of the first gallon. After the second coat things were looking good.


Now that the living room painting was done I continued up the stairs and into the hallway upstairs. The staircase is open, so I wanted to use the same color in the living room and in the stairway.

I ordered a new couch, and it was delivered recently. I’m really happy with everything looks. The second coat of grey paint brought down the blue tone I was originally worried about. I’m excited to get some thing on the walls and to continue to bring the room together.

Condo progress 1 005-001

Condo progress 1 007-001


The Start of Something

I recently moved into a condo I have owned and rented out for about 5 years. I decided it was time to no longer be a landlord, though things had gone well for the time I have tenants. I am really excited to get things all settled and decorated. It will be a slow process but I have time. I think if I take time and work at it slowly it will come together nicely and I won’t make a bunch of rushed decisions. Here are a few photos of the space when it was completely cleared out, before I did any painting or moving in.

The living room is the first room I will tackle in decorating. I will spend most of my waking time in this room and so I want it to feel homey and comfortable. It is a nice size and I look forward to getting things settled in this room.

Condo living room before

Condo Before 2013 015

The dining and kitchen are right off of the living space. The kitchen is small but sufficient for my needs. There is enough room in the dining area that I could easily put the leaf in my table to expand for more people.

Condo kitchen before

Condo dining room before

A nice, but small, half bath finishes the rooms on the first floor.

Upstairs there are two bedrooms, both good sized. The one will be my room and the other vacant for now. I am not sure what I will do with my room yet. I have thoughts of making a headboard, changing the wall color and getting new bedding but I don’t have anything specific in mind so for now I am content with using what I already had.

Condo Before bedroom

Condo other bedroom before

Completing the upstairs is a full bathroom. The bathroom is not large but with only one person having to get ready in the morning it isn’t a big deal. My dog Nelly doesn’t require any indoor bathroom time to get ready in the morning.

Condo bathroom before

So that is a little tour of my home! I have already started with some changes and I’m liking how things are coming together.


Christmas Comfort

A request was made of me probably six weeks before Christmas. Would I be willing and able to make an afghan for Christmas, something in shades of reds that would be out only for the holidays and which  would possibly in the future be a favorite blanket of my niece and any future niece or nephew? How could I resist?!?

I knew this would be quite the undertaking but I was willing to go for it. The request was for a plaid afghan so I made my way to Hobby Lobby to choose the yarns I wanted to use. I have made this certain pattern only once before and I did it with three colors.  For this project I decided to use four colors, red, white, dark red and a variegated red and white yarn.

The project is very simple, but time consuming. The horizontal stripes are made with alternating double crochets and chains. There is a repeating pattern, each of the colors was assigned a number. For example any time I was using the red yarn I would complete five rows, the white yarn would only be one row.

afghan 006

I completed the pattern six times to ensure that the finished product would be long enough after completing the vertical strips.

afghan 004

The vertical stripes simply involved using a larger sized hook and slip stitching from the bottom of the afghan all the way to the top one row at a time. I used the same pattern for the vertical rows as I did for the horizontal. This portion of the project is time consuming because you have to be extra careful to keep tension the same so the finished piece turns out with nice straight edges.



The final step is pulling in all of the ends…let me just say there are a lot of ends, with changing yarn colors as frequently as I did for this project there were probably over 200 little tails that needed to be pulled in.

Because this was a Christmas present I had to have this done before a certain sister arrived in town for the holiday. This didn’t happen so I did have to spend a little bit of time up in my room, by myself to keep the secret for a few more days. When I was wrapping the gift up on Christmas Eve with Alice in the room with me I knew the project was a success. The blanket was laid out on the floor, just so I could make sure I liked the finished look of it and the little darling laid right down on it.  When I tried to pick it up and give her a different blanket and was not a happy camper. Maybe she was tired, but I think she knew that this was going to be a special afghan for her for many years to come.


Thanks, Em!  It looks awesome on our couch! -Eliina


Plaid scarf pillow

Emily’s Chicago visit was months ago and I’m just now writing up our final project from that weekend.  We were super busy! In addition to my regular sofa pillows in shades of yellow, cream, and grey, I wanted to make some pillows that would work with our Christmas decor.  I searched local fabric stores for an awesome red plaid…and found nothing.  Very disappointing.  Then when I was shopping at H&M one day after work, I came across a fantastic, classic, very wide red scarf.  Perfect!

First step: confirm that the scarf is in fact cozy.  Emily performed the assessment.


After measuring the pillow we were covering, Emily trimmed the fringe off the scarf, and then cut the front panel.


Exposed brass zippers are having a moment in fashion, so we thought it would be fun to add one to the back of this pillow instead of using a pocket closure. (As with the monogram chevron pillow, I wanted this pillow cover to be removable and washable).  Emily cut two panels for the back side of the pillow.  My super helpful contribution was to pin the three pieces of fabric together!


Then, Emily did the real work.  So, I’ll let her tell you what she did.

I have never sewn a zipper into anything but I knew with a little thinking and maybe trial and error I would be able to figure it out. Now that the zipper is installed I would do it a little differently, but I will get to that in a bit.

The pillow had been all sewn together with an opening down the middle of one side for the zipper. When the fabric for the two back pieces was cut we added an additional ½ inch to the width so there was room to fold over the fabric and sew it to the zipper. The plan was to allow the zipper to show on the back of the pillow for added detail. I laid the zipper in the middle of the opening, with the fabric turned right side out, and made sure the fabric was laying nice and flat, this would help to make sure that I wasn’t pulling the fabric which would potentially make the pillow cover to small, or make it pucker. After this was nice and flat I took the fabric on the left side and folded it under to create a nice line, I then pinned this to the zipper in a few spots, making sure that the placement was fairly even down the zipper so the finished product looked nice.


After things were pinned where I wanted them I sewed the left side of the zipper to the fabric. This was nice and easy because the pillow was still open down the center.


Then as I began to repeat this same process on the right side of the zipper I realized I had made a mistake! Because I had sewn the rest of the pillow together there didn’t seem to be a way to sew the other side of the zipper to the fabric, I had left no opening in the pillow so any further stitching would end up sewing the back and the front of the pillow together…not the effect I was going for and to top it all off I had not brought a seam ripper with me so undoing a seam was going to be quite the process. As I sat and festered about this I realized that I could unzip the zipper! What a novel idea! Once I did that I continued with the same process as before of folding, pinning and sewing.

The zipper we chose was not the same length as the pillow so there were about 2 inches on the top and bottom of the zipper that still needed to be sewn together. I turned the pillow cover inside out and sewed a quick seam down to meet the zipper. Zipper installation complete!

Now for what I would do differently: I would install the zipper BEFORE sewing the rest of the pillow together. This would make the process a little easier.  -Emily

Here’s one last shot of my crafty sister Emily on my couch with all three pillows that she made for me! Thanks, Em.  -Eliina





Quilting Adventures Part 2

This weekend I finally got back to working on the quilt I started a while ago. I had made part of the top previously and the tasks I had left were:

  • Add a border to the top and section dividers
  • Cut the back to size
  • Buy the batting for the middle
  • Pin and sew the top, back and batting together
  • Tie the quilt

This list is why my project has not been finished. I have never completed these steps in quilt making by myself. I have been a part of making tops a number of times and I have tied quilts.  I’ve never completed the important middle steps before so I just wasn’t sure how things were going to develop, so I put this project on the very back burner for a while. Enter this weekend. I was ready to be productive and get a few things completed, or at least closer to completion. Between doing some holiday baking and working on a couple of secret gift projects I worked on and finished Nelly’s quilt!

Quilt Part 2 002

My first step was deciding how wide I wanted my border to be.  This would be the same width as the “section dividers”. I decided that about three inches would be a good width so I got to measuring and cutting. To leave room for the seam I cut seven 4” wide strips. The next step was just pinning them one at a time to the strips that I had made previously and sewing them together.

When this step was done I had a nice rectangular top ready to be pressed. I had been advised to NOT iron my seams open as I had seen in some other tutorials but rather to press them all in one direction. The reason for this was it would keep the seams stronger in the long run, when they are pressed open the stitches can be stressed more which would lead to stretching and potentially breaking.

I measured my top when it was all pressed and flat, and it was roughly 51”x58”. This was great except for the fact that the fabric for my back piece was only 45” wide and about 106” long so I was going to have to do some additional cutting and sewing. A couple of quick cuts later I was zipping the back through the machine, nice and easy. I pressed this as well and then asked my momma for some advice.

As previously stated my quilt making experience is limited. I wasn’t sure how to finish the quilt. What would I sew together to get the top, bottom and batting together? I took the three possibilities and went with what I thought would look the best without taking too much extra time This involved pinning the bottom, top and batting all together and then sewing around the edge, leaving a 10-12” gap so I could turn the quilt right side out when I was done. This involved layering the three pieces and making sure they lined up nicely, easier said than done when working on the floor, but I got it accomplished.

Quilt Part 2 009

Quilt Part 2 017

Quilt Part 2 013Quilt Part 2 007

Sewing it all together went smoother than I thought, I had a problem with the thread tension to start but after that I was off and running—ummm sewing. I left about a 10 inch opening at the bottom of the quilt and just reached in and grabbed a corner and carefully started to turn the quilt right side out.

Quilt Part 2 019

At this point I was very excited with how my quilt looked, for just piecing together scraps it was looking good! Two final steps and the I would be done. First I folded the fabric at the opening and took my needle and thread to it, just slowing stitching it closed. Then I laid the quilt out on the floor to tie it, this step it necessary to keep the 3 layers together when in use. You can also quilt the top in various ways but I knew that was not what was needed.  This quilt is going to be used by my dog Nelly, so she can lay on the couch and keep at least some hair contained!

Quilt Part 2 034

Quilt Part 2 030

Though this took a while to complete it wasn’t because of difficulty really, it was just procrastination. But I am really happy with the results and would definitely consider taking on another quilt someday. But for now I will just let Nelly enjoy her gift. Isn’t she a cutie all snuggled up!


Quilt Part 2 037

Sorry for posting this so late!  Emily wrote it before Christmas but her slacker editor didn’t get it up until now. -Eliina

Let the Decorating Begin

I love Christmas. I love the music, the decorations, the time with family, everything. Over the years I have started to do quite a bit of the decorating at our house and got a start on it this past weekend. We have a lot of options for decorations and not enough space for everything so the house looks different every year which I think is fun. This year I decided that the buffet would be one area that was done up completely different than it had been before.

Gold 007

Gold 012

This fall I made some faux enamel vases and I decided it would be nice to include those in my buffet arrangement. I have also always loved the look of ornaments piled up in a glass cylinder and we conveniently had a selection to choose from out in the garage!

Gold 001

Now that I had some height to work with I started to search through the boxes to find some gold ornaments to use. I quickly found the box of gold and got to work filling the container with godliness. There isn’t really any rhyme or reason to the way that I placed the ornaments, I just put in a few and then moved them around until I liked how they looked.

Gold 021

Next I found some red berries that I thought would bring a little brightness to the arrangement of gold, we have used these before on our trees, but this year they were getting a new use.

Gold 018

I used a couple of boxes to lift up the smallest vase so it didn’t get hidden in the gold fabric I chose to use to add some texture and shine to the buffet.

With three vases on the left and one large container of ornaments on the right I knew I needed something with a little more height in the middle to balance things out. I went back out to the garage to see what we had in the artificial tree department and I was in luck! We had a perfectly sized tree, about 2 feet tall and narrow enough to fit nicely in the space I had left.

The only item that I purchased new for this display was the gold pinecone candle. I saw it at Target when I was wandering through last week and I knew I had to have it, and an added bonus is the candle actually smells good!

Gold 019

I am really happy how the buffet turned out. Something different but almost everything was already in our Christmas stash. I continued my decorating binge and have things just about finished.  The only thing we need is our REAL tree.  Maybe this weekend we can trek out to the tree farm and pick out the perfect, narrow, but tall (if we want it to be) tree!